
OH LIC #38290
Your family's comfort is our #1 priority. A dependable heating and cooling system is a must to keep your home comfortable for you and your loved ones.
Westin Air’s teams of HVAC professionals are highly trained and are here to install a new system for you or maintain and service your present system.
We offer fair and transparent pricing with no hidden add-ons! Westin Air avoids gimmicks in our pricing because we all know there is nothing absolutely free! We try to give you the best quality installation and service, while charging a fair and competitive price.
If your heating equipment stops working in the winter season or your cooling system stops working in the middle of the summer, give us a call! We offer emergency service calls 24/7.
$35 OFF
Seasonal Inspection
1 coupon per customer.
 Not valid with any other coupon or discount. 
					Expires 10/31/25
$35 OFF
HVAC Repair services
Excludes Diagnostic fee
1 coupon per customer.
 Not valid with any other coupon or discount. 
					Expires 10/31/25
$200 OFF
Any New AC, Heat Pump, or Furnace
1 coupon per customer.
 Not valid with any other coupon or discount. 
					Expires 10/31/25
Do you offer emergency repair services?
Westin Air does offer emergency HVAC repair services in Westerville, Ohio.
Do you offer free estimates for replacement and installation?
Absolutely! We offer free estimates to replace your heating and cooling units or add a new unit to your home.
Do you offer a free 2nd opinion?
Our service department offers a free second opinion on cracked heat exchangers or condenser coil leaks. Give us a call at 614-794-1259 to schedule.
Do you offer air quality solutions?
Yes, we have a variety of products to improve your indoor air quality. Visit our indoor air quality page to see what options we offer, including our highly recommended iWave.
Do you offer maintenance services on systems installed by other companies?
Yes, Westin Air Heating and Cooling offers maintenance services on equipment installed by other companies.
When the temperatures drop and the snow is blowing, you need to be sure your furnace is operating with no issues. If your furnace suddenly stops working, or is having a hard time keeping your home warm, Westin Air provides furnace repairs on any make or model of furnaces. Our professional, courteous technicians can quickly diagnose your problem and provide you with a flat rate repair cost. No added on surprise costs! Our technicians have a supply of the most commonly used replacement parts in stock on their trucks. They can often repair your furnace right on the spot, to get you warm again in no time!
Westerville residents have relied on Westin Air for their furnace repairs for over 18 years. Whenever you need our services, just call us at 614-794-1259 24 hours a day to get scheduled for your furnace repair. One of our highly trained repair technicians will be glad to find your issue, explain the problem, and offer you a solution very quickly.
Westerville residents should not wait until their furnaces stop working to think about getting on a regular maintenance plan! Not only is it a huge inconvenience to have your furnace breakdown when it is cold outside, but regular maintenance actually extends the life of your furnace and keeps it running much more efficiently than a furnace that has not been maintained properly.
To avoid the hassle of your furnace not working, or working inefficiently, schedule a furnace tune-up, or sign up with one of Westin Air's annual maintenance plans. When performing a furnace tune-up or maintenance visit, a Westin Air service technician will test the furnace for safety issues, and identify any problems that could impact the safe, reliable, and efficient operation of your furnace. A problem that is caught early is much easier and less costly to fix than a furnace that has a much larger issue. A regularly maintained furnace also uses less energy, which will help lower your heating utility bills.
Westin Air has several different maintenance plans to suit the needs of every Westerville homeowner.
Westerville area homes come in all styles and sizes. This brings the challenge of selecting new furnaces with the features necessary for the most comfortable and energy-efficient operation. Our trained comfort consultants will be happy to come to your home for a free, no obligation visit. They gather all the information about your current system and listen to your concerns and expectations you have for a new system. If the capacity of the current system is questionable, our comfort consultant will do a load calculation to determine the correct capacity needed for your new furnace, all at no cost to you.
Westin Air has selected brands of heating and cooling equipment that we feel are some of the best in the industry to offer to our customers. We sell furnaces manufactured by Trane, Tempstar, and Daikin. Our installation crews know these brands very well, and have the skills to install every furnace neatly and efficiently, so you get optimum performance from your new furnace in your Westerville home.
It is best to plan ahead and save for your furnace replacement, but should the need arise unexpectedly, we offer financing options for your consideration. We also accept all major credit cards, along with checks and cash for your new furnace replacement purchase.
If your heat pump is needing repair in Westerville, OH, you've come to the right place. Westin Air's highly trained service technicians will be able to diagnose the problem and provide you with a written estimate for a flat-rate repair. Many of the common parts that are needed for heat pump repair are stocked on our service technicians' trucks.
When you use Westin Air for your Westerville heat pump repair, you can be sure you are getting quality parts installed by experienced technicians. Give us a call 24/7 when your heat pump is not working properly.
Heat pumps are a great product for cooling and heating your Westerville home. Because a heat pump works all year long, maintenance must be a priority for keeping your heat pump running efficiently and reliably. Westin Air's service technicians will check your heat pump and the air handler, also, if your heating system is all electric.
Whether you're considering replacing your heat pump in your Westerville, Ohio home because it is no longer working, or is just not very efficient anymore, call Westin Air. Their experienced and knowledgeable Comfort Consultant will come to your home and give you options to consider. Whether you are looking for just a basic, reliable heat pump, or are looking for a highly efficient model that will qualify for the Federal Tax Credit, Westin Air has great options to consider.
When the hot, humid summers in Westerville, Ohio take a toll on your air conditioner, Westin Air Heating and Cooling is here to quickly diagnose the problem and get your AC up and running again.
If you notice any of the above, call Westin Air and we will promptly send one of our service technicians to your Westerville home to diagnose the problem, and hopefully get the problem fixed quickly.
Summers can be quite hot and humid in Westerville, Ohio. You want to be sure that your air conditioner is ready to keep your home cool all summer long. Give Westin Air a call to set up your AC maintenance, as soon as the weather starts to warm up. Preventative maintenance is key to a dependable, efficient air conditioner. You can call us for a one time maintenance call, or you can sign up for our annual maintenance plan HERE.
Our technician will test and check out your unit, along with cleaning the coil, so your AC will run as efficiently as possible. If he finds any problem, he will discuss this and the best way to get your air conditioner ready for the season.
Even with the best maintenance, sooner or later, Westerville homeowners will need to replace their air conditioners. This usually will occur between 10-15 years, although with good maintenance, we have seen ACs running much longer, sometimes over 20 years. While some people prefer to wait until a unit is in need of a major repair to replace their air conditioner, others want to proactively replace it, to avoid having a major breakdown in the middle of the summer heat. Either way, you want a qualified, reputable local company to do your installation. Westin Air has been providing and installing quality air conditioners for over 18 years to the homeowners in Westerville, Ohio. When you decide it's time for a new, efficient air conditioner, give us a call!
Performed heating maintenance on a 2014 Trane two stage 96% efficient natural gas furnace Replaced humidifier water panel Old panel was disintegrating and causing the humidifier to leak water Verified correct operation and no water leaks and opened bypass damper to winter position Pulled condensate trap and flushed with water Pulled flame sensor and cleaned with steel wool Run tested furnace Low fire gas pressure set to 1.7"wc Temperature rise peaked at 59⁰ High fire gas pressure set to 3.5" Temperature rise 59⁰ Ran combustion test: numbers are perfect Tested ductwork for carbon monoxide-- got 0ppm reading Furnace is operating within factory specifications at this time
Bryant air handler preventative maintenence inspection. Current air filter is in good condition. Visual inspection of coil and blower compartment. Check for any loose or damaged wiring. Test ran operation of electric heat strips. All strips are operating properly and within specs. Blower motor is operating properly. Test ran in heat pump heating aswell. System came on and produced heat. Did not check refrigerant pressures as there are no issues suspected. Systems are operating properly, efficiently and ready for Winter.
Upon arrival inspected system and found inducer motor seized. Upon further inspection found motor full of rocks. Freed motor up after removing rocks, bearings sound mildly hurt, running a little loud. Unit heating with no other issues at this time. Motor may need replaced in the future due to damage but is currently operational
Upon arrival, found gas leak on line connection. Cut out leak and discovered fitting was damaged, had to wait on new fitting to be delivered once new fitting was delivered installed and tested for leaks, and then test ran the furnace to verify operation.
Complaint of unable to set the temperature on the thermostat Stat was running a schedule and adjusting at scheduled times Removed the schedule option Performed heating maintenance Tore down and cleaned both electronic air cleaners Cleaned flame sensor Blew out Condensate trap Vacuumed intake screen to the burner box Vacuumed inside burner box Checked for water leaks No stored fault codes for the system Run tested system Furnace operating normally at this time
Exhaust connection into concentric kit was leaking and pulled right out of the socket Re-primed the fitting socket and the pipe. Applied special glue that sets up quickly and reassembled. No water leaking from that section at this time.
Performed heating maintenance 20x25x4 filter is good Pulled and cleaned flame sensor Condensate trap is clear High fire gas pressure 3.2" Temp rise 45 Low fire gas pressure 1.3" Temp rise 41 Blower is clean Burners are rust free Tested iwave Customer states they do not use the humidifier: left damper closed and water shut off to it. No concerns found on today's visit other than the water heater ready to start leaking on the cold water inlet. Sent over quote to replace the hot water tank
Performed heating maintenance Pulled and cleaned flame sensor Set gas pressure to 3.5 on high fire and 1.9 on low fire Temp rise was 45⁰ No signs of water leaks Blower clean Filter is new
Performed heating maintenance on both furnaces 2003 Lennox in the attic had very good combustion test numbers. Basement furnace is 4 years old and has equally good combustion readings Replaced both filters Cleaned flame sensors Checked gas pressures Checked temperature rises Checked blowers Checked humidifier on basement system No water leaks present, operating correctly, set to 40% relative humidity No concerns found with either system
Preventative maintenence inspection on 2019 Trane furnace. 16x25x1 air filter in good condition. Clean flame sensor and check ignitor. Visual inspection of burners. Test run in heating mode from thermostat. Temperature rise is within specifications. Blower and inducer motors tested good. 4" galvanized B-vent in good condition and no sign of leaks. 0PPM CO detected during testing. System is operating properly, efficiently and ready for Winter.
Remove and replace inducer motor with OEM replacement motor Test run system after replacing motor, repair leaking drain on two spots add zip ties where clamps are no longer working from rusting.
Preventative maintenence inspection on gas furnace. 16x25x1 air filter in good condition. Clean flame sensor and check ignitor. Visual inspection of burners. Test run operation of heating mode. System is operating within temperature rise specs. Blower and inducer motors tested good. System is operating properly, efficiently and ready for Winter.
Preventative maintenence inspection on two Daikin high efficiency gas furnaces fueled by propane. Second floor system AA210 air filter replaced today. Basement system AA210 air filter in good condition. Left new filter on filter rack. Shop vac inside and out of furnaces to remove dust and debris. Cleaned flame sensors and checked ignitors. Visual inspection of burners. Flush condensation traps and drain lines. Run test units in both stages of gas heating for test Manifold gas pressures. Both furnaces are operating within Manifold gas pressure specifications on both high and low stages. Temperature rise for each unit in both stages is within range. Blower and inducer motors tested good. Pvc flue vents in good condition and no sign of leaks. 0PPM CO detected during testing. Basment dehumidifier was not plugged in, nor does it have a plug close enough. Jerry got extension cord to plug dehumidifier in. Test ran dehumidifier and set to 50% for basment. Adjusted settings and time on second f
Upon arrival inspected furnace and found inducer motor would not cycle. Hand start motor while power was also being supplied and motor started up, angrily sounding very loud and abnormal. Motor bearings have rusted/seized and lost the grease keeping motor spinning. Motor need replaced.
SOLD: 10/13/2025 10:43:55 AM - Option 2 Install New Daikin HVAC System Two Stage Variable Speed Furnace: Model #: DR80TC0803BNA Serial #: 2501458002 80,000 BTU's - 80% AFUE Single Stage Air Conditioner: Model #: DC3SEN3010A Serial #: 2502195029 2.5 Ton - 13.4 SEER2 Indoor Coil: Model #: CAPTA3022B3A Serial #: 2507258264 Installation: * Honeywell T4 Pro Thermostat * 1" Standard Filter Rack * Reconnect to existing electric * Transition to existing supply and return ductwork * Start up and commission new system Warranty: 12 Year Daikin manufacturers Parts Warranty (Annual maintenance must be performed) 2 Year Westin Air Labor Warranty (Annual maintenance must be performed) 20 Year Daikin manufacturers Exchanger Warranty (Annual maintenance must be performed)
Gas heating preventative maintenance performed Check filter - 16x25x1 clean Clean flame sensor Ohm test igniter: 58.4 Inspect wiring for loose connections and/or hot spots - none found Check humidifier pad: not in use Inspect exhaust flu - no concerns Set thermostat for heat Check amp draw on blower motor: 4.21 Check amp draw on inducer motor:0.74 Check delta T - 56° Furnace is in optimal running conditions
Preventative maintenence inspection on 2021 Comfortmaker furnace. 16x25x1 air filter in good condition. Clean flame sensor and check ignitor. Visual inspection of burners. Test ran in heating mode from thermostat. Temperature rise is within specs. Blower and inducer motors tested good. 4" galvanized B-vent in good condition and no sign of leaks. 0PPM CO detected during testing. System is operating properly, efficiently and ready for Winter.
Gas heating preventative maintenance performed Check filter - 20x25x4 clean Clean flame sensor Ohm test igniter: 57.6 ohms Inspect wiring for loose connections and/or hot spots - none found Check humidifier pad: n/a Inspect exhaust flu - 3” pvc no concerns Set thermostat for heat Check amp draw on blower motor: 5.31 Check amp draw on inducer motor:0.84 Check delta T - 56° Furnace is in optimal running conditions
Gas heating preventative maintenance performed Check filter - 20x25x1 new today Clean flame sensor Ohm test igniter: 53 Inspect wiring for loose connections and/or hot spots - none found Check humidifier pad: n/a Inspect exhaust flu - no concerns Set thermostat for heat Check amp draw on blower motor: 6.53 Check amp draw on inducer motor:1.09 Check delta T - 52° Furnace is in optimal running conditions
Performed heating maintenance on a 2013 trane two stage 96% efficient natural gas furnace Pulled and cleaned flame sensor Pulled and checked burners Vacuumed out burner box and intake screen Cleared condensate trap and clamped all hose connections to it Performed combustion test: results are perfect High fire gas pressure set to 3.5" with reference to burner box Low fire set to 1.65" Cleaned Trane CleanEffects electronic air cleaner and reset filter indicator Furnace is in great shape for its age and running well within manufacturer's specs at this time
Upon arrival inspected furnace and found popped 24v fuse. Inspected thermostat wiring and had short W to B inspected thermostat wiring at base, and found improper wiring with blue wire on B and on C at furnace. Disconnect B and test run furnace. Unit is heating with no issues after reconfiguring the wiring on thermostat.
Gas heating preventative maintenance performed Check filter - 16x25x4 due soon Clean flame sensor Ohm test igniter: 58.3 Inspect wiring for loose connections and/or hot spots - none found Check humidifier pad: ok - hum off - solenoid bad Inspect exhaust flu - pvc no concerns Set thermostat for heat Check amp draw on blower motor: 4.23 Check amp draw on inducer motor:0.89 Check delta T - 54° Furnace is in optimal running conditions
                                            
                                Upon arrival, system was in off mode. Turned thermostat t9 heating to perform test run. System immediately made buzzing noise but inducer motor never sterted. Inducer motor has seized up and will not operate. Replace failed inducer motor with new oem inducer motor. Test ran operation and found no other issues while on site. System is operating at this time.
Single stage 40kbtu 93% efficient carrier gas furnace Inducer needed spun free... amp draw 0.4A Performed heating maintenance on it Pulled and cleaned flame sensor Set gas pressure to 3.0"wc Corrected some minor wiring issues Furnace operating normally at this time.
We have used Weston air on several properties and the service is always professional and mechanically well done. The price is fair. What we like is that it’s very realizable,
We have been a customer of Westin Air for four years now and recently had our old HVAC system replaced by Westin Air. They are the most professional HVAC company we’ve ever had with outstanding service and technical excellent. When I had a question about a new sound from our new system when turning on the furnace, Wes the owner personally came to the house to check it out (the sound was normal to the new system). What service! If you have any HVAC needs, call Westin Air.
Service man showed up on time. Found part to be replaced and explained the problem. Also, gave us an overall status of the unit.
They all ways do a good job
My air conditioning stopped working. I called Westin Air and Heating, an LLC company in Westerville, OH. Seth, with that company, came out to diagnose our air conditioning problem. I had previously contacted Rightway, also a local Columbus, Ohio company, who told me my compressor was bad and that they had to order a part. From that point on, they never responded or scheduled a followup appointment. They also never responded to any of my calls, resulting in a lot of frustration. Hence I called Westin Air and Heat on the advice of a friend. Seth identified the problem which was that the compressor was not getting power. He replaced that piece ($118 approx. price vs a new compressor at probably around $1500), and we now have a properly working air conditioning system. Seth was prompt, professional, knowledgeable and honest. I will definitely recommend Westin Air and Heat any time I can. Can't say enough good things about them!
Excellent service!
Professional service
Great, thorough service. Arrived promptly. Provided clear feedback at mid point and end of service call.
Service person was considerate & efficient.
Great service - very pleasant fellow!
Always so plesant and thorough
Great service
Jake responded quickly on a Sunday to a lack of heat. He quickly diagnosed the issue and helped me decide on a course of action.
Excellent service!!
Jake does a Fantastic Job!